1. Microcomputer automatic control of temperature rise, temperature rise characteristics in line with the national standard GB219-96;

2. The camera captures the gray cone image and displays it in the position of the computer display by image processing technology. It automatically prints the melting temperature and shape.

3. Furnace temperature change is controlled by the front-end monolithic computer by PID control, and the temperature is transmitted to the computer system through the serial port, displaying the time-temperature image.

4. The system has the function of storing and calling the test results.

5. At the end of the experiment, you can choose to print the gray cone result image and the corresponding temperature data. You can also save the result file to automatically store and display the whole experiment process and display the temperature-time curve.

6. Furnace body can rotate freely and sampling and lofting is convenient.

7. The image and temperature of the test process are automatically saved and cleared after the next test begins.

8. Automatic judgment function: deformation temperature (DT), softening temperature (ST), hemispheric temperature (HT), flow temperature (FT).

Heating Element: Silicon Carbon Tube

Temperature measurement range: 0-1500 C

Heating rate: before 850 C, 15-20 C/min

900-1500 C, 5 C/min

900-1500 C, 5 C/min

Maximum heating current: 30A

Maximum heating temperature: 1600 C

Temperature acquisition element: platinum rhodium-platinum thermocouple

Temperature control mode: automatic regulation control

Rated power: 6kw

Power supply voltage: 220V + 10% 50Hz